Topworks Refrigeration Engineering.
Refrigeration
Tips
A commercial refrigerator is essential to your establishment, cooling all your beverages and ingredients to perfection. That’s why it’s important to perform routine upkeep on your unit between routine service visits. So what do you need to do on a regular basis? Below are some helpful commercial refrigeration maintenance tips to keep your unit clean and running strong.
Consistently Clean the Interior & Exterior
Try to schedule a thorough cleaning of your entire refrigeration unit on a weekly or biweekly basis. Remove items from the interior, and place them in another unit or temporary cooler. Using a soft brush, scrub the shelves and surface with warm water and soap or a vinegar solution. If you can remove any drawers and shelving, soak them for a while and rinse when clean.
The exterior of your unit also should be cleaned regularly. It’s important to use proper cleaning solutions and materials on a stainless steel exterior. Avoid using abrasive scrubbers or sponges as well as chlorine cleaners. Instead, use a wash cloth or soft brush to clean the surface. A combination of warm water and a vinegar or detergent-based solution works best for routine maintenance. If you need to remove grease or baked-on food, consider using a baking soda paste or an appropriate stainless steel degreaser.
Regularly Clean the Condenser Coil
You should clean your commercial refrigerator or freezer’s condenser coil routinely. Most manufacturers recommend cleaning once every three months, and many manuals provide specific cleaning tips. If dirty or dusty, it can be difficult to maintain temperature, causing overheating and component failure.
The coil is located near the unit’s condenser. Disconnect power to the unit, and use a stiff bristle brush to remove dust and dirt. Then, clear any remaining remnants with a strong vacuum or air compressor. Check out our guide on cleaning condenser coils or your equipment manual for more detailed instructions. Your manual should provide specific degreasing tips, which are crucial if your unit is in a kitchen near fryers or griddles.
Check the Area by the Evaporator Coil
Like the condenser coil, the evaporator coil is a vital component to your commercial refrigerator. The evaporator coil is located by the evaporator fan and is responsible for absorbing heat as warm air passes through the refrigeration system, helping cool the unit’s interior.
Make sure to keep the surrounding area near the coil clear and clean on a consistent basis. You should avoid cramming the interior with a lot of items, especially if they’re piping hot. Blocking airflow by the vents inside the unit can cause the coil to freeze, leading to water leaks and a rise in cabinet temperature.
Check the Gaskets Often
The door gaskets are essential to any commercial refrigeration unit. Any type of split or crack can prevent the door from sealing shut, causing cool air to exit the fridge’s interior. If a gasket is broken, make sure to replace it with the appropriate manufacturer recommendation. For instance, when replacing a True refrigerator gasket, you must use the gasket associated with your unit’s serial and model number.
If there are no splits or cracks, you should still routinely clean the gaskets to prevent any damage. This should be done more often if the unit is in a commercial kitchen where grease is regularly used. Too much grease and dirt can wear out your gaskets over time.